• <u id="pf4h2"><form id="pf4h2"><pre id="pf4h2"></pre></form></u>
    <big id="pf4h2"></big>

        色一情一狱一爱一乱,狠狠操av,口爆国产视频网站,国产xxxx,jizzjizz韩国,久久大香伊蕉在人线国产h,91亚洲人成电影在线观看网色,夜夜夜操
        主營產品:伴熱電纜,阻燃電纜,高溫電纜,耐火電纜
          免責申明|網站地圖| 聯系我們
        內頁幻燈標題

        耐火電纜

        0.6/1kv聚氯乙烯交聯聚乙烯J緣耐火電力電纜PVC(XLPE)InsulatedFire-Resistant Power Cable產品標準本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯…
        • 電 話:15956084188
        • 傳 真
        • 郵 箱:229877070@qq.com
        Description
        0.6/1kv聚氯乙烯交聯聚乙烯J緣耐火電力電纜
        PVC(XLPE)InsulatedFire-Resistant Power Cable
        產品標準
        本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料J緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產,同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
        The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

        適用范圍
        本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
        The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

        使用特性
        ·工頻額定電壓U0/U:0.6/1kV。
        Rated power-frequency voltage U0/U:0.6/1kV.
        ·電纜導體的高允許長期工作溫度(PVC/XLPE):70℃/90℃.
        Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
        ·短路時(長持續時間不超過5s)電纜導體高允許溫度
        PVC:導體截面≤300mm2-160℃
        導體截面>300mm2-140℃
        XLPE:250℃
        Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
        PVC:cross-section of conductor≤300mm2-160℃
        cross-section of conductor>300mm2-140℃
        XLPE:250℃
        ·電纜敷設時環境溫度應不低于0℃
        The ambient temperature under installation should not below 0℃
        ·電纜的彎曲半徑:多芯電纜不小于電纜外徑15倍,單芯電纜不小于電纜外徑20倍。
        The bending radius of a single-core cable should not less than 20 times of the cable diameter.
        The bending radius of multicore-cable should not less than 15 times of the cable diameter.

        電纜的型號Type of cable

        瀏覽:
        返回頂部